125H2-CB Single wall tubing
Very-thin-wall, halogen-free, highly flame-retardant, heat-shrinkable tubing
Application
Typically used where space saving is important. Offers the ability to pack components more closely than is possible with standard tubings. Cost-effective choice for many commercial applications; electrically insulates and protects in-line components, disconnect terminals, and splices. Used for strain relief on high-density connectors.
Product facts
- 2:1 shrink ratio
- Very thin wall provides space savings and rapid shrinking
- Low shrink temperature further reduces installation time and risk of damage to temperature-sensitive components
- Very flexible; doesn’t easily wrinkle when bent
- Free of polybrominated biphenyls (PBBs) and polybrominated biphenyloxides and ethers (PBBOs and PBBEs), which are classified as environmentally hazardous substances
Performance standard: UL224 CAN/CSA C22.2 NO198.1-99
Environmental protection standard: RoHs, IPC/JEDEC-J-STD-709, H-class material
Installation
Minimum shrink temperature: 70°C
Minimum full recovery temperature: 120°C
Operating Temperature Range: -55°C to 125°C
Specification
Specification | Inside diameter as supplied | Maximum recovered after heating (mm) | Standard package (m/set) |
Inside diameter | Wall thickness |
ø1.0CB | 1.40±0.20 | ≤0.65 | 0.20±0.10 | 200 |
ø1.5CB | 1.90±0.20 | ≤0.85 | 0.20±0.10 | 200 |
ø2.0CB | 2.40±0.20 | ≤1.00 | 0.22±0.10 | 200 |
ø2.5CB | 2.90±0.20 | ≤1.30 | 0.25±0.10 | 200 |
ø3.0CB | 3.40±0.20 | ≤1.50 | 0.28±0.10 | 200 |
ø3.5CB | 3.90±0.20 | ≤1.80 | 0.28±0.10 | 200 |
ø4.0CB | 4.40±0.20 | ≤2.00 | 0.30±0.10 | 200 |
ø4.5CB | 4.90±0.20 | ≤2.30 | 0.30±0.10 | 100 |
ø5.0CB | 5.50±0.20 | ≤2.50 | 0.32±0.10 | 100 |
Ø6.0CB | 6.50±0.20 | ≤3.00 | 0.32±0.10 | 100 |
Ø7.0CB | 7.50±0.30 | ≤3.50 | 0.32±0.10 | 100 |
Ø8.0CB | 8.50±0.30 | ≤4.00 | 0.32±0.10 | 100 |
Ø9.0CB | 9.50±0.30 | ≤4.50 | 0.35±0.10 | 100 |
ø10CB | 10.50±0.30 | ≤5.00 | 0.35±0.10 | 100 |
Ø11CB | 11.50±0.30 | ≤5.50 | 0.40±0.10 | 100 |
Ø12CB | 12.50±0.30 | ≤6.00 | 0.40±0.10 | 100 |
Ø13CB | 13.50±0.30 | ≤6.50 | 0.40±0.10 | 100 |
Specification | Inside diameter as supplied | Maximum recovered after heating (mm) | Standard package (m/set) |
Inside diameter | Wall thickness |
ø14CB | 14.50±0.30 | ≤7.00 | 0.40±0.10 | 100 |
Ø15CB | 15.50±0.40 | ≤7.50 | 0.40±0.10 | 100 |
Ø16CB | 16.50±0.40 | ≤8.00 | 0.40±0.10 | 100 |
Ø17CB | 17.50±0.40 | ≤8.50 | 0.40±0.10 | 100 |
Ø18CB | 18.50±0.40 | ≤9.00 | 0.42±0.10 | 100 |
ø20CB | 20.50±0.50 | ≤10.0 | 0.45±0.10 | 100 |
Ø22CB | 22.50±0.50 | ≤11.0 | 0.45±0.10 | 100 |
Ø25CB | 25.50±0.50 | ≤12.5 | 0.45±0.10 | 50 |
Ø28CB | 28.50±0.50 | ≤14.0 | 0.45±0.10 | 50 |
*Dimensions are shown for reference purpose only. Specification subject to change. Products can be produced according to given specification. Please contact us for further information and confirmation.